Free Hanging Shelf Bracket

Building a Shower Bench?

The recommended bracket for Floating Shower Benches is The Original Shower Bench Bracket®.

Building a Floating Vanity? 

We highly recommend our Free Floating Vanity Bracket® to help bring your dream bathroom to reality.  

Building a Floating Bench or Seat?

We recommend using our Industrial Free Hanging Shelf Bracket®.

Floating shelves, floating mantel/hearth, floating desk all are supported by the Free Hanging Shelf Bracket. This bracket is the perfect concealed support bracket for supporting a floating desk or floating shelf. Your choice of Steel (Interior) or Solid Aluminum (Exterior) material.

This bracket is made to mount directly to the 2x4 wood studs inside your wall before the sheetrock goes up (If studs are metal, watch the video below before installing the Free Hanging Shelf Bracket) the Free Hanging Shelf Bracket must be mounted into wood studs to support the weight of the shelf, etc. We recommend hitting each of your 2x4 studs for maximum protection. 

How to Determine the Size Bracket You Will Need:

When measuring for length remember the horizontal piece is measured tip to tip. Remember to also include the part of the bracket that will be inside of the wall [usually about 3 inches]. For example, if you have a 12-inch wide shelf you would stay 2-4 inches from the outer edge, plus the 3 inches inside the wall. Therefore, 12 inches minus 3 inches (from the outer edge) plus 3 inches (inside the wall) equals a 12-inch Shelf Bracket.

Dimensions:

Length: [You Choose] This is the total length of the horizontal piece of the bracket from tip to tip. [Remember that approximately 3 inches will be inside the wall]

Width: 2-1/2 inches

Thickness: 1/2 inch

Dimensions of the Vertical Tang:

Vertical Length: 11 inches [5.25 inches above horizontal piece and 5.25 inches below horizontal piece]

Width: 2-1/2 inches

Thickness: 1/4 inch

Hole Dimensions: 1/4 inch [3 holes above horizontal piece and 3 holes below horizontal piece]

Exceptional Features:

• Hardware Included.
• Made from Steel (Interior) or Solid Aluminum (Exterior) Material.
• Virtually invisible, gives your shelf, countertop, desk, or fireplace mantel the appearance of floating.
• The perfect countertop overhang bracket.
• Easy to install.
• Screw holes are on top and bottom of the vertical piece.
• Welded for solid strength.
• Made of 1/2-inch-thick by 2 1/2-inch-wide American Steel or Solid Aluminum.
• This bracket is painted with an anti-rust matte black paint.
• Made in the USA.
• Limited Lifetime Warranty**

Helpful Information & Downloads:

• Shipping information will be available upon order placement.
• For orders exceeding 20 brackets or a general breakdown of how our shipping works check out our Shipping Policy for lead time. 
• Although we have standard sizes, we can manufacture special order brackets with specifications to your request.

Have questions or need assistance? Contact our dedicated customer service team at 904-217-8490 or email sales@cswpros.com.

Quick Links:

• FAQ
• Spec Sheet
  
• Installation Guide
• Installation Video
• Shipping Policy